Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Anchorage supports staking on all the below protocols, which are also supported by Kiln. To stake with Kiln, select the Kiln operator in the Anchorage UI or enter the Kiln validator address as found on this page:
Note, Anchorage also supports staking on the following protocols which are not yet supported by Kiln: Axelar (AXL), Agoric (BLD), Celo (CELO). If you'd like to stake these assets you hold in Anchorage, please get in touch with us.
To stake Ethereum held in Copper:
Ensure you have the Copper Connect Chrome extension installed and Metamask disabled
Choose Metamask as the connection option in the Kiln dashboard
Your Copper Connect extension will pop up, follow its prompts
Follow this demo video for more details!
From the Copper UI, navigate to the Stake tab and choose the asset in the dropdown.
Enter the Kiln validator address for the protocol you wish to stake in the blue box above.
Kiln validator addresses are available here:
In your API call, enter the Kiln Validators addresses as listed here:
Asset | Stake via UI |
---|---|
You can then stake the following assets, either manually via the Bitgo UI or programmatically using the :
Asset | Stake via UI | Stake via API |
---|
The full list of assets supported by Bitgo is available
Please visit the Bitgo API documentation available .
Asset | Stake via UI | Stake via API |
---|
The full list of supported staking protocols is visible on of the Coinbase Prime helpdesk.
For all the assets listed above, navigate to the asset's page. Click on the Stake button in the Actions section. If you are already delegating to a validator, follow to change which validator you delegate to.
Asset | Kiln supported | Stake via UI | Stake via API |
---|
See the Copper API specs .
Asset | Stake via UI | Stake via API |
---|
Aptos (APT)
✅
Cosmos Hub (ATOM)
✅
DyDx (DYDX)
✅
Ethereum (ETH)
Get in touch
Evmos (EVMOS)
✅
Osmosis (OSMO)
✅
Oasis (ROSE)
✅
Sei (SEI)
✅
Solana (SOL)
✅
Sui (SUI)
✅
Ethereum (ETH) | Get in touch | ✅ |
Near (NEAR) | ✅ | ✅ |
Solana (SOL) | ✅ | ✅ |
Polygon (POL) | ✅ | ✅ |
Polkadot (DOT) | ✅ | ✅ |
Cardano (ADA) | ✅ | ✅ |
Sui (SUI) | ✅ | ✅ |
Stacks (STX) | ✅ | ❓ |
Aptos (APT) | ✅ |
Avalanche (AVAX) | ✅ |
Celo (CELO) | ✅ |
Cosmos Hub (ATOM) | ✅ |
Near (NEAR) | ✅ |
Oasis (ROSE) | ✅ |
Polkadot (DOT) | ✅ |
Solana (SOL) | ✅ |
Stacks (STX) | ✅ |
Sui (SUI) | ✅ |
Tezos (XTZ) | ✅ |
Algorand (ALGO) | ⏳ | ✅ | ✅ |
Avalanche (AVAX) | ✅ | ✅ | ✅ |
Axelar (AXL) | ⏳ | ✅ | ✅ |
Binance Coin (BNB) | ❌ | ✅ | ✅ |
Cardano (ADA) | ✅ | ✅ | ✅ |
Cosmos Hub (ATOM) | ✅ | ✅ | ✅ |
Divi (DIVI) | ❌ | ✅ | ✅ |
Ethereum (ETH) | ✅ | ✅ | ✅ |
Helium (HNT) | ❌ | ✅ | ✅ |
Injective (INJ) | ✅ | ✅ | ✅ |
Oasis Network (ROSE) | ✅ | ✅ | ✅ |
Kusama (KSM) | ✅ | ✅ | ✅ |
Polkadot (DOT) | ✅ | ✅ | ✅ |
Solana (SOL) | ✅ | ✅ | ✅ |
Stacks (STX) | ✅ | ⏳ | ⏳ |
Nem (XEM) | ❌ | ✅ | ✅ |
Zilliqa (ZIL) | ❌ | ✅ | ✅ |
Near (NEAR) | ✅ | Coming soon |
Axelar (AXL) | ✅ | Coming soon |
Agoric (BLD) | ✅ | Coming soon |
Audius (AUDIO) | ✅ | Coming soon |
Flow (FLOW) | ✅ | Coming soon |
Mina (MINA) | ✅ | Coming soon |
Polkadot (DOT) | ✅ | Coming soon |
Oasis (ROSE) | ✅ | Coming soon |
Skale (SKL) | ✅ | Coming soon |
Stake directly with Kiln from your custody platform interface.
Ethereum can easily be staked using the Kiln Dashboard connected via WalletConnect to your DFNS account, as shown in this demo video:
The Kiln Connect API can be used to generate ETH validation keys to be funded in a deposit transaction. The deposit transaction can be issued programmatically using the DFNS API. Get in touch with your Kiln account manager to set this up!
Kiln is natively integrated with Metamask Institutional. To find out more about our partnership, please read this blog post.
To stake Ethereum using MMI, please visit the Staking tab inside your dashboard, select Kiln as an operator, and follow the instructions.
Connect your Metamask Institutional browser extension. Once you have connected, you can stake as per the instructions here:
Connect your Metamask Institutional browser extension. Once you have connected, you can stake as per the instructions here:
Kiln has a native integration with Ledger Vault, meaning you can stake your ETH onto Kiln-run validators in a few clicks.
Ledger Vault mainnet smart contract address is:
0x746d8A8FCAB7f829Fa500504f60D89C5CC1EA973
Do not interact with other addresses.
Please also follow the Ledger support guidance below:
Use a smart contract call (docs) to stake to the Kiln On-chain smart contract address. Get in touch to go through this.
Tezos can also be staked in a few clicks. When choosing your baker, select a Kiln baker address as listed here:
Choose the Kiln validator in the Stake Solana menu as such:
You can verify Kiln's Solana validator address on this page:
Follow the instructions here.
POL can be staked in a few clicks by going to the official Polygon Staking Website and connecting your Ledger Vault with WalletConnect, as per this video walkthrough:
When choosing the validator, select the Kiln validator listed here:
Follow the instructions here.
Follow the instructions in the UI as per this video:
When choosing the validator, select "Ledger x Kiln" validator.
Please get in touch with your Ledger account manager.
Follow the instructions in the UI as per this video:
For any questions, don't hesitate to reach out to your Ledger account manager or to the Kiln team.
You can use the Fordefi extension to stake assets via the Kiln Dashboard. See a video demo of how to do this below on Ethereum. The flow is the same on Polygon (POL), as Polygon staking occurs by depositing POL tokens on the Ethereum network.
To stake Cosmos-based chains (e.g ATOM, DYDX, TIA, etc), you can select "connect with Keplr" on the Kiln Dashboard or from the Keplr website, and connect your Fordefi wallet instead.
In the Kiln Dashboard, just select the Fordefi option in the Connect Wallet modal and stake in a couple of clicks.
Please get in touch with the Fordefi team to enable this.
Please get in touch to stake other assets.
To stake non-EVM chains you need to enable non-EVM contract calls in your workspace. To do so, please contact Fireblocks support.
To stake via WalletConnect as shown in the below videos you must:
Enable the DeFi feature in your Fireblocks workspace
Update your TAP to enable contract calls
To stake via SDK/API you must enable the Fireblocks Raw Signing API, follow the prerequisites guide, and ensure your TAP is set up adequately. Please get in touch with Kiln or Fireblocks support for assistance on this.
Ethereum can be staked from the Kiln dashboard using WalletConnect. See how in this video:
You will also need to set up your Fireblocks TAP to enable staking (instructions are provided in the Fireblocks UI).
Use the Kiln Connect SDK to generate validators on the Kiln platform and issue the stake deposit transaction through the Fireblocks raw signing API.
Solana can be staked from the Kiln dashboard using WalletConnect. See how in this video:
Solana can also be staked natively from the Fireblocks Console!
You will also need to set up your Fireblocks TAP to enable staking (instructions are provided in the Fireblocks UI).
Use Kiln Connect to facilitate this.
POL can be staked from the Kiln dashboard using WalletConnect. Please follow our Polygon staking documentation.
You will also need to set up your Fireblocks TAP to enable staking (instructions are provided in the Fireblocks UI).
You can stake POL using the Stake tab of your Fireblocks console in a couple of clicks:
Use Kiln Connect to facilitate this.
NEAR can be staked from the Kiln dashboard using WalletConnect.
Use Kiln Connect to facilitate this.
ADA can be staked from the Kiln dashboard using Fireblocks Raw Signing. Please follow our ADA staking documentation.
Use Kiln Connect to facilitate this.
ATOM can be staked from the Kiln dashboard using Fireblocks raw signing. Please follow our Cosmos staking documentation.
Use Kiln Connect to facilitate this.
Use Kiln Connect to facilitate this.
DOT can be staked from the Kiln dashboard using Fireblocks Raw Signing. Please follow our DOT staking documentation.
Use Kiln Connect to facilitate this.
Once you have setup your Fireblocks Vault for raw signing, you will need to add a TAP rule to allow raw signing on the vault of your choice for FET. Here is an example where we enable raw signing on the vault 37 (see derivation path: 44, 118, <vault id>, 0, 0).
FET can be staked from the Kiln dashboard using Fireblocks Raw Signing. Please follow our FET staking documentation.
Use Kiln Connect to facilitate this.
Please be aware of the configuration prerequisites for staking with Fireblocks: link.
When issuing a delegation transaction programmatically, you will need to enter the Kiln validator addresses which are available here:
Asset | Stake via UI | Stake via API |
---|---|---|
Asset | Stake via UI | Stake via API |
---|---|---|
Asset | Stake via UI | Stake via API |
---|---|---|
Asset | Stake via UI in Kiln Dashboard | Stake via API |
---|---|---|
Asset | Stake via UI | Stake via API |
---|---|---|
Ethereum (ETH)
✅
✅
Ethereum (ETH)
✅
Ethereum (ETH)
✅
✅
Babylon (BAB)
✅
✅
Polygon (POL)
✅
✅
Solana (SOL)
✅
✅
Cosmos Hub (ATOM)
✅
✅
Celestia (TIA)
✅
✅
dYdX (DYDX)
✅
✅
Sei (SEI)
✅
✅
Osmosis (OSMO)
✅
✅
Stride (STRD)
✅
✅
Dymension (DYM)
✅
✅
Sui (SUI)
✅
✅
Aptos (APT)
✅
✅
Cardano (ADA)
✅ (using Fireblocks raw signing)
✅
Cosmos (ATOM)
✅ (using Fireblocks raw signing)
✅
Polkadot (DOT)
✅ (using Fireblocks raw signing)
✅
DYDX (DYDX)
✅ (using Fireblocks raw signing)
✅
Ethereum (ETH)
✅ (using the Fireblocks console, WalletConnect or the Fireblocks Chrome extension)
✅
Evmos (EVMOS)
🟠 (On Keplr using Fireblocks Chrome extension)
❌
Fetch.ai (FET)
✅ (using Fireblocks raw signing)
✅
Flare (FLR)
🟠 (On FlareStake using Fireblocks Chrome extension)
❌
Injective (INJ)
✅ (using Fireblocks raw signing)
✅
Kava (KAVA)
🟠 (On Keplr using Fireblocks Chrome extension)
❌
Polygon (POL)
✅ (using the Fireblocks console, WalletConnect or the Fireblocks Chrome extension)
✅
NEAR (NEAR)
✅ (using WalletConnect)
✅
Osmosis (OSMO)
✅ (using Fireblocks raw signing)
✅
Solana (SOL)
✅ (using the Fireblocks console or WalletConnect)
✅
Celestia (TIA)
✅ (using Fireblocks raw signing)
✅
Ton (TON)
✅ (using Fireblocks raw signing)
✅
Tezos (XTZ)
🔴 Fireblocks does not support "Delegate operation". https://github.com/nooxx/tezos-wc-issue
✅
Zeta (ZETA)
✅ (using Fireblocks raw signing)
✅
Ethereum (ETH)
✅
❌
Solana (SOL)
Coming soon
❌
Asset
Stake via UI
Stake via API
ETH
✅
✅
POL
✅
✅
SOL
✅
✅
ATOM
✅
✅
OSMO
✅
✅
INJ
✅
✅